Contact Us 
Toll Free: 888.725.3633
Fax: 888.798.9791
Email: JFTradeTools@gmail.com

TROUBLE SHOOTING 

If you have selected the proper diamond blade for your application and equipment, but are still having  problems with your blade it can be due to numerous factors:

Loss of Tension 
  •  Check the alignment of your saw 
  •  Check the RPM you are cutting at 
  •  Check the blade to see if it is twisted or bent 
  •  Make sure the blade was properly mounted….CHECK ARROW DIRECTION 
Lost Segments 
  •  Make sure the material you are cutting is stable 
  •  Check the arbor of the blade to make sure it isn’t worn 
  •  Was the blade overheated? 
  •  Cracked Segments 
  •  Check again to make sure the blade is proper for the application and your equipment 
  •  Overheating 
  •  Check to see if the blade was given the proper coolant 
An Out of Shape Arbor Hole 
  •  Make sure the blade is properly set on arbor 
  •  Make sure arbor nuts are tight 
  •  Cracked Core 
  •  Make sure blade isn’t bent or twisted 
  •  Check to see if blade was given proper coolant 
  •  Blade That Won’t Cut 
  •  Check equipment and power...CHECK ARROW DIRECTION 
Excessive Wear 
  •  Check to see if blade was given proper coolant 
  •  Check bearings and arbor for wear 
  •  Check the RPM you using to cut
Uneven Wear of Segments 
  •  Check alignment of your saw 
  •  Check to see if blade was given proper coolant 
  •  Check bearings and arbor for wear 

"Diamond Tools For Your Trade"
HomeAbout UsProductsTrouble ShootingAggregate Map USAJF Referral ProgramContact Us